Lifted CBD - USA's No1 Online Vendor for all your CBD needs    LOOKING FOR THE BEST CBD DEALS? YOU MUST SEE THIS!
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer
Pax 3 Vaporizer

    Pax 3 Vaporizer

    $199.99

    PAX 3 Portable Vaporizer 

    Is the PAX 3 the right portable vaporizer for me?

    The PAX 3 is the perfect portable vape as it fits discreetly in your hand and is small enough to fit in your pocket or a purse without taking up much space. It works great with both dry herb and concentrates, so whether you want to dabble in you have to option in the palm of your hand. If you are looking for a sleek, stylish, and compact vaporizer you have found it. 


    Does it leave any kind of smell?

    Like other vaporizers the PAX 3 has a slight smell, but nothing like smoking out of a pipe or joint. You will be free to vape anywhere without other people noticing that you are vaping concentrates or dry herbs. 


    How to use pax 3

    To start, you will want to serialize your vaporizer to ensure all manufacturing oils are gone. You will begin pressing down on the mouthpiece to turn on your vaporizer. You will then want to click on the button until all of the LED lights light up and illuminate red to signal that you are at the highest temperature. Press and hold the power button to start the heat-up process, the vaporizer will automatically turn off when it does not sense use. Repeat this process three times to complete the sterilization process. 


    Once the sterilization process is complete you are ready to start loading your vaporizer. You will want a fine grind of herb to pack your chamber. At the bottom of the device, you will find the chamber, remove the magnetic lid, and load the chamber packing lightly with the packing tool. Place the lid back on and you are ready to vape. If you are vaping with concentrates it is the same steps, but with the concentrate insert. 


    Temperature settings

    4 temp setting indicated by the LED lights on the front of the PAX 3. pressing and holding the power button on the top of the unit will enter the temperature selection mode. 


    To cycle through the different heating profiles you will short press the power button until the lights start to illuminate. When one light is illuminated the unit is set to 360F when two lights are illuminated the unit is at 380F, when there are three lights illuminated it is set to 400F, and when all of the lights are illuminated it is set to 420F. 


    Do more with the APP

    As of November 15th Apple has banned all use of vaporizer APPS on their mobile devices. If you had downloaded and vaporizer APPS before November 15th you are still able to use them. Android users still have access to all vaporizer APPS. 


    PAX Labs has gone a step further for their customers and have made a web APP for Apple users. By no means do you need an APP to control your device PAX has made their device completely usable with all functions on the device itself. 


    In June 2020 PAX made an APP for desktop that allows PAX users to connect through bluetooth. It will help in fine-tuning temperature control, managing your dosage and sessions, lockout mode where you can lock your PAX from others using it, fine-tuning the brightness and haptic feedback, and many more options that are now available to PAX users. Connect your new PAX through pax.com/app to allow yourself more control over your vape sessions.


    Through the APP you also have the option of 4 different dynamic modes. 

    Boost Mode

    Boost mode limits the auto cooling for longer allowing you stronger sessions.

    Flavor mode

    Flavor mode keeps your device at lower temperatures unless you are drawing, for optimal flavor.

    Efficiency Mode

    Efficiency mode will automatically increase the temperature throughout the entire session.

    Stealth Mode

    Stealth mode will keep your device at cooler temperatures and allow for quicker cooling.

    How to clean pax 3

    You will need the pipe cleaner, isopropyl alcohol, and paper towels. 

    Start by removing the oven lid and mouthpiece and inserting the cleaning brush into the top of the unit to clean out the vapor path. It will also pop out the oven screen from the bottom. You will set the oven lid, mouthpiece, and concentrate chamber (if you have used concentrates) into a shallow dish of isopropyl alcohol for 20-30 minutes


    Once the time has passed you will then take out all of the accessories and use a pipe cleaner or cotton swab to get into the corners and ensure that all of the loose particles are out. You will then rinse with water and towel dry.


    To clean the heating chamber take a cotton swab in isopropyl and swab the inside. Once completed put your PAX 3 back together and turn it on to the highest heat setting. Allowing it to run through a couple of heating cycles to burn off any leftover alcohol. 


    How often should I clean my PAX 3?

    The PAX 3 heating chamber and vapor path should be brushed out after every use using the cleaning brush. You will want to do a deep clean about once a week depending on how often you use your unit. 


    How to change the pax 3 mouthpiece?

    There are two different mouthpieces that come with the PAX, the flat mouthpiece and the raised mouthpiece. To remove them from the device you will need to use the multitool that comes with the complete kit. If you do not have the multitool just dig your finger a little inter the rubber mouthpiece and pop it out. 


    Everything to know about charging your device

    PAX uses a USB charging port and a magnetic charger that connects to the device. Place your device on the magnet and the LED lights will start to illuminate, glowing white petals indicates your device is charging. The more petals lit the more your device is charged. When the petals stop pulsing and all glow white your device is charged completely. 


    You will have a completely charged PAX 3 in about 90 minutes. A full battery life will last roughly 8-10 sessions. 

    When did pax 3 come out?

    Founded in 2007 PAX has done nothing but improve its products. In 2012 they released the original PAX and in 2016 they welcomed the PAX 3 which can be used with dry herb or concentrate. The PAX 3 comes in 2 different kits: a basic kit that is best for dry herb only and a complete kit which is good for both concentrates and dry herb.


    What's included

    Complete Kit


    • PAX 3 Vaporizer

    Basic Kit


    • PAX 3 Vaporizer
    • USB Charger
    • USB Charger
    • Flat Mouthpiece (already on device)
    • Flat Mouthpiece (already on device)
    • Raised Mouthpiece
    • Raised Mouthpiece
    • Cleaning kit
    • Cleaning kit
    • Standard Oven Lid
    • Standard Oven Lid
    • Half-Pack Oven Lid

    • Concentrate Inserts

    • 3 Extra Screens

    • Multi-Tool

    • Carrying Pouch


    Features 

    • Uses a 3500 mah battery
    • Charges completely in 90 minutes
    • 4”H X 1”W X 1”D
    • Oven size 0.3 g
    • 360 - 420F
    • 20-second heat uptime
    • App compatible with Android users
    • Web APP compatible with Apple users
    • 8-10 sessions per charge
    • 10 year manufacturer warranty

    RELATED PRODUCTS

    BACK TO TOP
    Are you over the age of 21?
    Yes

    I am over the age of 21
    No

    I am NOT over the age of 21
    The products on this website are intended for adults only.
    By entering this website you certify that you are of legal smoking age in the jusrisdiction in which you reside.