Who Should Buy Dynatec Induction Heater Apollo 2 Rover?
DynaVap is a truly original device that allows users to enjoy vape experiences without having to keep their device fully charged, or to learn the ins and outs of a mysterious interval heating system.
Of course, this means that you need an external heat source. The most common form this takes is a small butane jet torch. This works great, but some people may find it too dangerous, too difficult to use, or even wasteful.
That's where the Apollo 2 Rover comes in. This compact induction heater allows users to enjoy super-rapid heat up times of only a few seconds without having to worry about open flames or butane fuel. All you need to do is push your VapCap into the small opening on the face of the device and wait until you hear the mechanical click!
Why You’ll Love Dynatec Induction Heater Apollo 2 Rover?
The Apollo 2 Rover is a fully rechargeable and sustainable alternative to other external heating methods like torches. Instead of relying on combustion and finite fuel, it uses direct induction heating powered by a built-in battery.
This has a lot of advantages over a torch. For one it is easier and safer to use, and on top of this, it creates far more consistent results. This is because by heating your VapCap to the same temperature and in the same way every time, the herb within will vaporize in predictable ways.
A heating cycle in the Apollo 2 Rover takes around five to eight seconds, depending on whether the VapCap is made out of titanium or stainless steel.
The Apollo 2 Rover is intuitive and simple to use. Press the VapCap into the small aperture on the right of the device. Hold it down until a red LED appears. Hold the cap there until it lets out its distinctive mechanical click, which lets you know it's good to go. The Apollo 2 Rover induction heater for DynaVap features an automatic shut-off that kicks in after about 15 seconds, so you don't have to worry about wasted battery life.
How To Use Dynatec Induction Heater Apollo 2 Rover?
How To Operate Dynatec Induction Heater Apollo 2 Rover
Ensure your Apollo 2 Rover's battery is fully charged. To begin heating your vapcap, push it down into the aperture. This will automatically activate the heating system. After a few seconds, it will reach vaping temperature and emit a mechanical click.
How To Get Best Vapor Quality
For bigger clouds, keep your VapCap in the aperture for a few moments longer while still applying heat.
How To Clean/Maintain It
The Apollo 2 Rover is low maintenance. Ensure you keep it fully charged with its AC adapter and you'll be good to go!
Dynatec Induction Heater Apollo 2 Rover Features
1. Induction Heating
The induction heating system of the Orion V2 allows you to heat your VapCap vaporizers to vaping temperatures rapidly. It works with both stainless steel and titanium VapCaps and brings them to sufficient temperature in a few moments.
2. Automatic VapCap Detection
The Orion V2 is perfectly designed for VapCaps capable of sensing when they are present in its aperture. This allows it to apply the optimal amount of thermal energy right where it is needed.
A DynaMag is inset on the top of the Apollo 2. This clever little attachment allows users to safely set down their VapCap vaporizer. The magnet holds it in place, upright and stable. This means that you won't have to worry about misplacing it.
4. Automatic Cut off
To preserve battery and to prevent damaging your vape, the Apollo 2 Rover features an automatic cut off that kicks in after around 15 seconds of heating.
Is the Dynatec Induction Heater Apollo 2 Rover worth It?
The Dynatec Induction Heater Apollo 2 Rover is perfect for DynaVap fans who want to escape their reliance on combustion based heating systems. It frees them from having to worry about fuel levels or the dangers of an open flame. Instead, you get a sustainable, efficient rechargeable device that will last you a lifetime.
Compare with similar products
The Orion V2 is another induction heater from DynaVap. Much like Apollo 2, it offers a fantastic alternative to butane torches. However, it does have some features that make it even easier to use. This includes USB-C charging, which means you don't have to worry about finding a dedicated AC outlet when it’s time for your to recharge your device.
- 1x Apollo 2 Rover
- 1x Instructions
- 1 x UL listed 100-220v switching power supply
- 12 Month Warranty
4.5" x 3.5" x 2"
Most Important Questions About The Dynatec Induction Heater Apollo 2 Rover
Can The Dynatec Induction Heater Apollo 2 Be Used With Other Vaporizers?
The Apollo 2 is designed for use with DynaVap VapCap vaporizers, no other type of vaporizer can be used with it.
Is the Dynatec Induction Heater Apollo 2's Heating Automatic?
When you press your VapCap into the opening on the Apollo 2 and hold it down, it will begin heating until you remove it or the auto shut off kicks in.
Is the Dynatec Induction Heater Apollo 2 Consistent?
The Main advantage of the Apollo 2 is how consistent and predictable its heating system is. You can expect it to deliver the same experience, time and time again.