Who Should Buy Pulsar Hand E-Nail V3?
The Pulsar Hand E-Nail V3 is a part of the incredible wave of e rigs that is sweeping the concentrate scene. If you've always wanted to enjoy the power of a dab rig with the precision of a vaporizer, and the incredible cooling and filtration of a glass water tool, then the Pulsar Hand E-Nail V3 is everything you need and more.
Devices of this type are fast becoming the best way to enjoy concentrates. They're compact, portable, and offer an incredible level of consistency.
On top of this, users who want to avoid open flames and red-hot buckets and nails will love how convenient and easy it is to use the Pulsar Hand E-Nail V3.
Why You’ll Love Pulsar Hand E-Nail V3?
The Pulsar Hand E-Nail V3 brings together the precision and consistency of a vaporizer. An electronic heating system can be controlled via several heat settings that are far more accurate and precise than any combustion-based method.
The built-in glass components and bubblers allow users to enjoy water cooling with their vapor without having to use a water tool and separate bubbler.
On top of this, it comes with a selection of nails. These are available in the three most prominent and popular concentrate vaping materials: Ceramic, titanium, and quartz.
Each of these offers a different vape experience with a nail suitable for nearly every type and consistency of concentrate.
How To Use Pulsar Hand E-Nail V3?
How To Operate Pulsar Hand E-Nail V3
To start, fill the bubbler with water to around the halfway point on the percolator. Any higher and your risk splashback. This is important to do first, as it can be dangerous to do it when the battery is active or potentially ruin your concentrate if it is already in the nail. Following this, you slot the bubbler onto the top of the device.
The dab tool is incredibly user-friendly, allowing you to load your concentrate onto the nail with a magnetic lock assist. This means that you can swab up some concentrate with the nail and then place it into the cap without worrying about dropping the tool.
To activate the device press the button mounted on its face three times in rapid succession. If you are using the ceramic nail, then press it five times in rapid succession.
To increase the temperature, allow the nail to fully heat up and reach the auto cut off before activating it again. The temperature will increase with each subsequent activation for a total of three separate heat settings.
How To Get Best Vapor Quality
Getting the best vapor quality out of your concentrates with the Pulsar Hand E-Nail V3 is a matter of choosing the right atomizer for the right concentrate.
A more viscous concentrate will benefit from the titanium nail, which reaches vaping temperature extremely quickly but also cools down quickly, making it ideal for multiple hits in a session.
A slower burning concentrate will greatly benefit from the consistent heating of the ceramic nail.
Note: It is also important to ensure that the water in the bubbler is frequently changed, this will improve its cooling and ensure that you don't spoil the tastes of your hits.
How To Clean/Maintain It
Overall the Pulsar Hand E-Nail V3 is easy to maintain thanks to the fact that it has competitively few components to take care of.
The main focus of cleaning should be on the three nails, the bubbler, and the mouthpiece. The bubbler and mouthpiece can be cared for like any other glass component.
Remove them from the main body of the device and gently clean them with isopropyl alcohol. If you run into any stubborn grime, then you can use q-tips or a soft bristled brush to gently break up and wipe it away.
Two of the nails, the ceramic and quartz, can be cleaned by steeping them in some isopropyl alcohol. The final nail should be kept away from harsh chemicals like this and instead cleaned with a burn-off session in the vaporizer.
Top 5 Pulsar Hand E-Nail V3 Features
Choice of Nails
The Pulsar Hand E-Nail V3 comes with three nails, each of a different material. Quartz is one of the most common materials used in concentrate vape design. It heats up quickly and has a non-reactive nature.
Ceramic is a little less common but it is valued for its conductive properties, capable of evenly distributing heat across the entire surface area of dry herb. This is great for when you want incredibly consistent hits.
The final material is titanium; this is far less common than ceramic or quartz. However, many consider it to be a material of the highest quality, it heats up quickly, is nonreactive, and is incredibly easy to maintain.
Each of these materials offers a subtly different vape experience, and on top of this, each is suited for a different consistency of concentrate. This means that the Pulsar Hand E-Nail V3 is ideal for practically any type of dab material.
The Pulsar erig features a 2500mAh battery, an incredibly high capacity power source that will last an entire day of consistent use. This battery is large than the type used in many other types of vaporizers, so you'd be hard-pressed to find this sort of power elsewhere. When it does finally run down the device can be easily recharged via USB.
The glass components in the Pulsar are made out of high quality borosilicate glass. This material is hotly sought after in the dry herb scene due to its resilience, non-reactive nature, and clarity.
It is also very resistant to thermal shock, which means that the rapid temperature fluctuations associated with concentrate vaping are a low risk to its overall structure.
This type of glass is created by adding silica to glass during its creation and is a specialized high-quality material that is only used by manufacturers who want to fully commit themselves to make the best device they can.
Unlike older e-rigs and e-nails, the Pulsar Hand E-Nail V3 doesn't require an external power supply. Instead, it runs off on an internal battery. This means that it has a level of portability unseen in dab rigs until very recently.
It is also fully rechargeable via USB, which means that you can make sure that it is fully charged no matter where you go.
Easy to Use
Thanks to clever, clear design; a simplified control scheme, and user friendly magnetic components; the Pulsar Hand E-Nail is easy to use. Even changing the nails is a breeze, all you need to do is unscrew the current nail, set it aside, and replace it with another. However, you must allow the nail to fully cool before removing it.
Is the Pulsar Hand E-Nail V3 worth It?
The Pulsar Hand E-Nail V3 is on the more affordable end of the portable electric dab rig spectrum.
It offers a complete dabbing concentrate vape experience with a broad selection of customization options thanks to the three voltage presets and the three different nails.
The nails alone are a respectable amount of bang for your buck. The battery is another major plus, being far more powerful than that seen in many other vapes in the same niche as the Pulsar.
Overall, for beginners and intermediate users, the Pulsar is a great investment. More advanced users may find it lacking, but if you want a simple, and straightforward experience then look no further.
Compare with similar products
The KandyPens Oura exists in a similar price range and weight class compared to the Pulsar. It has been built with KandyPen's years of industry experience and combines the consistency of electronic heating with the smooth filtration of water cooling.
It is one of the most compact and user-friendly e-rigs on the market to date, with a range of temperature settings that can be used to get the most out of nearly any concentrate.
It comes with a pair of atomizers to choose from, a quartz one for rapid heating, and a ceramic element for more consistent hits.
It fears a massive, powerful 3000mAh battery that is USB-C rechargeable.
Finally, it also features a sesh mode that engages a heating cycle for 60 seconds, making it the perfect party vape.
What’s in the box:
- Glass Mouthpiece
- Silicone oil slick container
- Hard case storage box
- USB charging cable
- Ceramic, titanium & quartz nails
- Magnetic carb cap w/ removable dab tool
- Glass bubbler attachment
Wax & oil
650°F - 1000°F (343°C-537°C)
5 Most Important Questions About Pulsar Hand E-Nail V3
Q1. Can the Pulsar Hand E-Nail V3's bubbler be locked in place?
The bubbler cannot be locked in, it is suctioned onto the top of the device and can get a little wobbly, but is secured on.
Q2. How Stable is The Pulsar Hand E-nail V3?
The Pulsar comes bundled with a base for stability. This is magnetic and can be locked onto the bottom of the device securely.
Q3. How do you switch the nails on the Pulsar Hand E-Nail V3?
Switching between the included nails is easy as they just screw into the main body of the rig. Be sure that they are fully cooled before you attempt this.
Q4. How To Use The Pulsar Hand E-Nail's Ceramic Nail?
The ceramic electric dab nail needs to be treated slightly differently from the other two. Rather than triple tapping the power button to start a heating cycle, instead press it five times in rapid succession. This triggers a special heating cycle more suitable for the ceramic nail.
Q5. What sort of concentrate can I use with the Pulsar Hand E-Nail?
The Pulsar Hand E-Nail V3 is compatible with any wax or oil style concentrate.